Network administration projects

Static NAT configuration on Cisco router

Description

The routers are connected to each other on a serial link. The ethernet interfaces on the routers are connected to the respective networks 192.168.1.0/24 and 192.168.2.0/24.

Read more »

ACL configuration to block FTP access to specific subnet

Description

The ethernet interfaces of the router is configured for two networks as shown in the diagram. The FTP server is setup on the 192.168.2.0/24 network with the IP address 192.168.2.2

Read more »

Intervlan routing

Description

The project demonstrates the concept and need of intervlan routing. The router is configured for multiple sub interfaces for different VLAN’s.The switch is connected to the router on a trunk port.The ports on the switch are configured for multiple vlans on which the different PC’s are connected.

Read more »

RIPv2 configuration on a Serial Link

Description

R1 and R2 are connected to each other via serial link. RIP v2 is the routing protocol configured on the routers. The LAN interface of the routers are connected to the switches where the respective PC’s are connected.

Read more »