CCNA/CCNP

Projects based on CCNA and CCNP.

Hospital Network Design

Project Scope

A network proposal has to be designed for a hospital which has the following. There is a main block and three wards in the campus. The main block is the administrative block where registration of new patients takes place. The main block has 5 floors. The hospital has identified hospital management software, which should be accessible by the employees. The software is installed on a server at the administrative block. At the ground floor, there are 15 computers at the billing section. At other floors, there is one computer user each. The farthest distance between the computer on the top most floor and the ground floor is less than 70 meters. The wards have 5 floors each, with 10 computers in the gound floor of each ward. The distance between the wards and the blocks are less than 80 Meters. The computers in the wards may be increased based on future expansion plans.

Network requirements

1. Hardware requirement analysis in main block with quantity.
2. Hardware requirements analysis in wards.
3. The employees should receive dynamic IP addressing from a central server.
4. Network should be loop free at Layer 2
5. Every computer should be able to access the hotel management software from each of the location using a fixed IP address.
6. IP Network design table.
7. Identify configurations on the hardware wherever appropriate.
8. Network topology diagram with necessary equipment’s

Buy the project report – details below

Report Contents

1. Project Scope
2. Network requirements
3. Network requirement analysis (Main and wards)
4. Hardware analysis
5. Configuration guidelines
6. IP Network design table.
7. Network topology diagram
8. Network Testing and verification.
9. Hardware list with quantity

Report format – PDF

Pages – 6

Price – $10

——————————————————————————————————————
Click on the Add to Cart button to buy and download with PayPal or credit card on PayPal website

Add to Cart

The report would be downloaded automatically and you would also receive the download link in the email used for payment.

Small Business Network Design with Guest Network

Project Scope

A small business network has to be designed for an organization. The organization has occasional guest users (Max 10) visiting the office. There are a total of 50 users in the organization. A FTP server is also available for sharing files.

Network requirement.

1.Separate subnet for guest and LAN network.
2.The guest network should be restricted to access only FTP service on the FTP server and all other access to the LAN network should be blocked.
3.IP Network Design
4.Identify the hardware – Switches and Routers.
5.Configuration details on hardware

Buy the project report – details below

Report Contents

1. Project Title
2. Project Scope
3. Network requirement
4. Network planning
5. IP Network design table
6. Network Topology diagram with IP addresses
7. Network Integration plan
8. Network configuration (Router interface and ACL configuration with explanation)
9. Network Testing and verification procedure
10. Hardware and Software

Report format – PDF

Pages – 6

Price – $15

———————————————————————————————————————

Click on the Add to Cart button to buy and download with PayPal or credit card on PayPal website

Add to Cart

The report would be downloaded automatically on successful payment and you would also receive a copy of the report in the email used for payment

—————————————————————————————————————–


LAN Network design with redundancy

Project Scope

A network which has redundancy in the design to to be setup for an organization. The organization is currently having an internet connection, which is setup using a Cisco router. The gateway addresses for users in the LAN is currently provided as an intermediate routers address, which would then forward all internet bound packets to the internet router. The network has to be upgraded by having dual intermediate routers which would automatically failover, and provide high availability access to the internet. HSRP is to be used for the deployment. The project identifies the configurations required on Cisco routers to achieve the same.

Networking requirements

1.LAN IP network design.
2.Network Topology diagram.
3.Configurations required on the routers to setup high availability with HSRP.
4.Configurations required on the routers to setup appropriate IP address and internet packet forwarding on the routers.
5.Configurations required on the LAN PC’s for appropriate gateway parameters.
6.Verification and Testing Procedure

Hardware

1.Cisco routers ( 2 nos)
2.Cisco switches ( 2 nos)
3.Internet router (Internet not mandatory)
4.PC (As per requirement)
5.Network cables.

Buy the report which contains the solutions to the requirements.

Report format – PDF

No of Pages – 6

Price – $18

———————————————————————————————————————-

How to buy the report

———————————————————————————————————————-
Click on the Add to Cart button and make the payment with a PayPal account or credit card on PayPal website.

Buy Now

The report would be downloaded immediately after successful payment and you would also receive a copy of the report in your email used for payment.

Custom Project Help – Click Here

Click here to view the project report list

————————————————————————————————————————

VLAN network design with restricted internet access

Project Scope

To design a network for a software development organization based on vlan with Cisco routers and switches. The organization has three departments, development, testing and trainee and a high speed internet connection.

Read more »